Open (plate type) heat shrinkable joint are polyethylene panels, the dimensions of which correspond exactly to the diameter of the jacket pipe. Open heat shrinkable joint are placed on the pre-insulated. This type of sealing provides comprehensive sealing by shrinkage and protection at very high resistance parameters.
Open heat shrinkable single seal joint set
- Open (plate type) heat shrinkable joint – 1 pc;
- Bracket (support) – 4 pcs;
- Connector sleeve – 2 pcs;
- Pressure-welded plug – 2 pcs;
- Air vent plug – 2 pcs;
- PUR component set – 1 set;
Open heat shrinkable double seal joint set
- Open (plate type) heat shrinkable joint – 1 pc;
- Bracket (support) – 4 pcs;
- Connector sleeve – 2 pcs;
- Pressure-welded plug – 2 pcs;
- Air vent plug – 2 pcs;
- Heat-shrinkable tape – 2 pcs;
- Closure patch – 2 pcs;
- PUR component set – 1 set;
Open heat shrinkable joint dimensions:
| Joint diameter, mm | Wall thickness, mm | Lenght, mm |
| Ø110 | 4 | L-700/L-900 |
| Ø125 | 4 | L-700/L-900 |
| Ø140 | 4 | L-700/L-900 |
| Ø160 | 4 | L-700/L-900 |
| Ø180 | 4 | L-700/L-900 |
| Ø200 | 4 | L-700/L-900 |
| Ø225 | 4 | L-700/L-900 |
| Ø250 | 4 | L-700/L-900 |
| Ø280 | 4 | L-700/L-900 |
| Ø315 | 4 | L-700/L-900 |
| Ø355 | 4 | L-700/L-900 |
| Ø400 | 4 | L-700/L-900 |
| Ø450 | 4 | L-700/L-900 |
| Ø500 | 5 | L-700/L-900 |
| Ø520 | 5 | L-700/L-900 |
| Ø560 | 5 | L-700/L-900 |
| Ø630 | 6 | L-700/L-900 |
| Ø710 | 8 | L-700/L-900 |
| Ø800 | 8 | L-700/L-900 |
| Ø900 | 8 | L-700/L-900 |
| Ø1000 | 8 | L-700/L-900 |
| Ø1100 | 8 | L-700/L-900 |
| Ø1200 | 8 | L-700/L-900 |