The heat-shrinkable single-seal joint is placed on the pre-insulated pipe joint. Both ends of the joint heated up shrink. This type of sealing ensures complete tightness after shrinkage and protection at very high resistance parameters.
The maximum temperature during transport or storage must not exceed +40 ºC.
Heat-shrinkable single joint set
- Heat-shrinkable joint – 1 pc;
- Bracker (support) – 4 pcs;
- Connector sleeve – 2 pcs;
- Pressure-welded plug – 2 pcs;
- Air vent plug – 2 pcs;
- PUR component set – 1 set;
Parameters of heat-shrinkable sleeve:
- Diameter from Ø90 to Ø1200 mm;
- Wall thickness from 3 mm to 11 mm;
- Standard lengths are L-500, L-600, L-700 mm.
Line No. | Steel diameter d, mm | Plastic diameter D, mm |
1 | 26,9 | 90 |
2 | 33,7 | 90 |
3 | 42,4 | 110 |
4 | 48,3 | 110 |
5 | 60,3 | 125 |
6 | 76,1 | 140 |
7 | 88,9 | 160 |
8 | 114,3 | 200 |
9 | 139,7 | 225 |
10 | 168,3 | 250 |
11 | 219,1 | 315 |
12 | 273,0 | 400 |
13 | 323,9 | 450 |
14 | 355,6 | 500 |
15 | 406,4 | 560 |
16 | 457,0 | 560 |
17 | 508,0 | 630 |
18 | 610,0 | 710 |
19 | 711,0 | 800 |
20 | 813,0 | 900 |
21 | 914,0 | 1000 |
22 | 1016,0 | 1200 |