The heat-shrinkable double seal joint is placed on the pre-insulated pipe. The ends of the joint heated up shrink, which is the type of sealing that provides total shrinkage sealing and protection at very high resistance parameters.
The maximum temperature during transport or storage must not exceed +40 ºC.
Heat-shrinkable double joint set
- Heat-shrinkable joint – 1 pc;
- Bracket (support) – 4 pcs;
- Connector sleeve – 2 pcs;
- Pressure-welded plug – 2 pcs;
- Air vent plug – 2 pcs;
- Heat-shrinkable tape – 2 pcs;
- Closure patch – 2 pcs;
- PUR component set – 1 set.
Parameters of heat-shrinkable sleeve:
- Diameter from Ø90 to Ø1200 mm;
- Wall thickness from 3 mm to 11 mm;
- Standard lengths are L-500, L-600, L-700 mm.
Line No. | Steel diameter d, mm | Plastic diameter D, mm |
1 | 26,9 | 90 |
2 | 33,7 | 90 |
3 | 42,4 | 110 |
4 | 48,3 | 110 |
5 | 60,3 | 125 |
6 | 76,1 | 140 |
7 | 88,9 | 160 |
8 | 114,3 | 200 |
9 | 139,7 | 225 |
10 | 168,3 | 250 |
11 | 219,1 | 315 |
12 | 273,0 | 400 |
13 | 323,9 | 450 |
14 | 355,6 | 500 |
15 | 406,4 | 560 |
16 | 457,0 | 560 |
17 | 508,0 | 630 |
18 | 610,0 | 710 |
19 | 711,0 | 800 |
20 | 813,0 | 900 |
21 | 914,0 | 1000 |
22 | 1016,0 | 1200 |